-
About Qingfeng
-
-
-
New Products on the Market-Qingfeng Vaspergon Constant Temperature Insulation Jacket
Release time:
2018-10-17
The thermostatic thermal insulation jacket of the vas deferens is used after the battery is full. Please turn on the device switch in the laboratory, automatically heat the temperature to about 38 degrees Celsius to stabilize, and put the vas deferens into the thermal insulation jacket.
Product Name:Vasperm thermostatic jacket
Product model:QF188
1. startup operation and operation
When the battery is fully charged, please turn on the switch of the device in the laboratory. The device first displays the set temperature for 5 seconds and then displays the measured temperature of the device. The device will automatically heat up38℃ ±0.2C or so and stabilized (different use environment is slightly different). Equipment from0Heating38℃, the time required is about30Within minutes, after willVaso gunCan be placed in the insulation sleeve, easy to operate.
Instructions for use of 2. products
1. Charging of lithium-ion battery pack
(1) When the display shows the character "Charging", please turn off the device and charge the battery pack.
(2) When the battery pack is charging, the red indicator light of the charger is on. When the red indicator light turns green, it indicates that the battery pack has
Full charge, after the battery pack is fully charged, please disconnect the charger in time.
(3) Please use the special charger equipped with this product when charging. The charging ambient temperature is recommended15-30The best.
2. Use, storage and replacement of lithium-ion battery packs
(1) For newly purchased equipment, the battery pack will have some power. It is recommended not to use it directly. Please use it after it is fully charged.
(2) When the equipment is not in use, be sure to store it in a dry and cool place. When storing for a long time, please charge and discharge it every three months.
(3) Do not modify the battery pack, and do not place the equipment in a microwave, high temperature, and high pressure environment.
(4) When the lithium ion power is insufficient and needs to be replaced, it needs to be replaced by a professional or under the guidance of a professional.
Instructions for use of 3. charger
1. Technical parameters
Input voltage: AC100-240V
Output voltage: DC12.6V
Output current: 1A
Working temperature: 10-60 ℃
Storage temperature:-20-65 ℃
2. Safety warning
(1) Beware of rain forest, high temperature and humid environment.
(2) It is strictly prohibited to charge the battery pack of non-company.
Share
Telephone:+86-0531-8712 3999 +86-151 6919 5199
Address of Marketing Department: Energy Saving Demonstration Building, Wolong Road, downtown Jinan City
Message feedback