Vasperm thermostatic jacket

The newly purchased equipment and battery pack will have some power. It is recommended not to use it directly. Please use the special charger equipped with this product before fully charging. The charging environment temperature is recommended to be 15-30 ℃.

Key words:

Classification:

Instrument Series

Hotline:

+86-0531-87126999

Related Products

online message

Vasperm thermostatic jacket

Product name: vasa gun thermostatic insulation coat

Product model: QF188

Technical parameters

mains charger input voltage: AC100-240V output voltage: DC12.6V output electro-hydraulic: 1A

Car charger input voltage: DC12-24V output voltage: DC12-12.6V output electro-hydraulic: 1A

Output current: 1A working temperature: 10-60 ℃ storage temperature:-20-65 ℃

Product instructions

1. (1) For newly purchased equipment, the battery pack will have some power. It is recommended not to use it directly. Please use the special charger equipped with this product before it is fully charged. The charging environment temperature is recommended to be 15-30 ℃.

(2) When the battery pack is charging, the red indicator light of the charger is on. When the red indicator light turns green, it indicates that the battery pack hasFull charge, after the battery pack is fully charged, please disconnect the charger in time. The battery pack takes about 2 hours and 45 minutes from low voltage output protection to full charge.

2、The device switch is turned on, and the device first displays the set temperature for 5 seconds and then displays the measured temperature inside the thermostatic package. The device will automatically heat to about 35°C according to the measured temperature and stabilize (different use environments are slightly different). The apparatus was warmed from 0°C to 35°C over a period of approximately 30 minutes.

3. Insert the equipment of the vas sperm gun into the thermostatic bag.

4. Temperature setting: press"When you are healthy once, display the set temperature and press it continuously."", the temperature numbers flash in turn, through""and"button to adjust the temperature. 5 seconds after the parameter setting is completed, the meter resumes displaying the measured temperature.

Precautions for the use of equipment:

(1) When the equipment is not in use, be sure to store it in a dry and cool place. When storing for a long time, please charge and discharge it every three months.

(2) Do not modify the battery pack, and do not place the device in a microwave, high temperature, and high pressure environment.

(3) When the lithium ion power is insufficient and needs to be replaced, it needs to be replaced by a professional or under the guidance of a professional.

(4) Battery replacement method: Pull the zipper on the instrument to the lowest end, loosen the two screws on the front of the instrument with a screwdriver, remove the small cover, pull out the battery plug from the instrument jack, remove the old battery pack, insert the new battery plug into the instrument hole, and tighten the small cover.

(5) This product is limited to indoor use, beware of rain, high temperature, humid environment.

(6) This product is not allowed to unpack and open the package without permission. All losses caused by unpacking and opening the package without permission shall be paid by yourself.